Welcome to M.E.P.CAD's downloads and updates section!
 

AutoSPRINK VR

Application

Build 65 - November 6, 2002

Build 65 of AutoSPRINK VR addresses items in many categories including Hydratec/Gem export functions, display updates, metrics, and stock listing, as well as a couple items in hydraulic reporting and calculation.  An itemized list is contained in the patch notes linked below.

You can download the patch from the link below.  Please save it to your local system and then run it.  During the installation, it will verify the location of your AutoSPRINK installation and your parts database and then complete the installation automatically.  If you experience any problems with the update, please call tech support.

If you have multiple installations of AutoSPRINK on your system, pay close attention to where the patch is installed.  It will ask you where you want the patch applied and if you apply it to your AutoSPRINK 2000 directory instead of the VR directory, your 2000 installation will no longer function.

Update your current version of AutoSPRINK VR to version 3.7.65.796

View Patch Notes.  View the changes and fixes for AutoSPRINK VR version 3.7.65.796.

Database Updates for AutoSPRINK VR

The database for versions 3.7.65 and higher has been updated to fix an issue with hangers (DT5134).  The new database requires AutoSPRINK VR 3.7.65 or higher.  The seven MB database has been zipped down to one MB and can be downloaded here. 

Note: Ultra Eddy  2" and DI Class 52 16" has been updated, specifically the inside diameters.  To Download a spec sheet on the Ultra Eddy go to. http://www.bullmoosetube.com/

To view the spec sheet on the DI Class 52 click on the link below.

http://www.uspipe.com/

*German Parts have been added to the parts database as of May 28th.

*As of 7/1/03 the inside diameters for Eddy Flow 1 1/2", 2" and Dyna-flow allied 1" have been updated, please download the Parts Database below to obtain these changes.

Database Update for AutoSPRINK VR 3.7.65 - July 1, 2003

If you unzip it into your main AutoSPRINK directory, the next time you start up AutoSPRINK, it will notice the new file and, after prompting you for approval,  integrate your parts into the new database.

Pipe Label Printing

The release version of AutoSPRINK VR assumes you're printing your pipe labels on full-sized (8.5x11) sheets of 4x2 inch labels.  If you're using a dedicated, label-only plotter for standard 4x2 inch labels (such as the Zebra), you'll need different files.

The 4x2 inch format should work with most any label printer, but the Zebra S500/105S label printer was specifically tested (driver test only). Each of the two files below contain the following file set:

AS_SDRNLabels.rpt,  AS_FabWeldLabels.rpt,  AS_AllLabelsCombined.rpt,  AS_ThreadedLabels.rpt,  AS_ThreadedLabelsBL.rpt

These files should be extracted directly in your AutoSPRINK VR directory. 

Files required for 4x2 inch Stocklisting (Pipe) Labels

If you've installed the 4x2 inch label plotting files and need to go back to 8.5x11 inch label sheets, the files you need to do so are here.  As before, please extract the files directly into your AutoSPRINK VR directory.

Files required for 8.5x11 inch Stocklisting (Pipe) Labels

Languages for AutoSPRINK VR

French

Spanish

Other translations are in progress for the AutoSPRINK VR release.